Scroll Top
Jabotinsky 9, Hachsharat HaYeshuv Tower , Bnei Brak

0.1-40GHz Synthesizer (FSYN-001400-HP)

← Back to PLL & Synthesizers

FSYN-001400-HP synthesizer

PC/SPI-programmable microwave synthesizer, 0.1–40 GHz, dual-band architecture (0.1–18 GHz and 18–40 GHz) with 8 outputs and built-in high-stability reference.

Frequency & Outputs
Frequency range 0.1 – 18 GHz on RFOUT2, RFOUT3, RFOUT4, RFOUT5, RFMON3; 18 – 40 GHz on RFOUT1, RFMON1, RFMON2 (only one band active at a time)
Number of outputs 8
Frequency step 0.5 MHz
Output impedance 50 Ω nominal
Frequency switching time 150 µs typ; 200 µs max after LE signal
Output Power (programmable within 60 dB attenuator range)
RFOUT1 (18–40 GHz) -15 dBm
RFMON1, RFMON2 (18–40 GHz) -30 dBm
RFOUT2–5 (0.1–18 GHz) 0 dBm
RFMON3 (0.1–18 GHz) -20 dBm
RF power variation ±1.5 dB typ; ±3 dB max over temperature and frequency
Isolation between high / low band outputs > 60 dB
RF mute Yes, > 60 dB isolation; switching time < 100 ns
Output Level Control
Range / step 0 – 60 dB / 1 dB
Accuracy 0.1–10 GHz ±0.75 dB typ @ +25°C; ±1 dB over temperature
Accuracy 10–18 GHz ±1 dB typ @ +25°C; ±1.5 dB over temperature
Accuracy 18–26 GHz ±1.5 dB typ @ +25°C; ±2 dB over temperature
Accuracy 26–40 GHz ±2 dB typ @ +25°C; ±3 dB over temperature
Spectral Purity
Spurious -60 dBc typ; -50 dBc max (carrier ±10 MHz)
Subharmonics -50 dBc typ; -40 dBc max
Harmonics -30 dBc typ; max -15 dBc (100–1000 MHz), -20 dBc above 1000 MHz
SSB Phase Noise (dBc/Hz, typ / max)
Offset @ 100 MHz @ 5 GHz @ 20 GHz @ 40 GHz
100 Hz -117 / -111 -84 / -78 -71 / -65 -65 / -59
1 kHz -125 / -119 -101 / -95 -88 / -82 -82 / -76
10 kHz -130 / -124 -110 / -104 -99 / -93 -93 / -87
100 kHz -140 / -134 -113 / -107 -101 / -95 -95 / -89
1 MHz -148 / -142 -128 / -122 -114 / -108 -108 / -102
Reference
Reference input 10 MHz or 100 MHz, -6 to +6 dBm (automatic detection)
Reference output 0 dBm @ 50 Ω load
Frequency accuracy (external reference) error < 1 Hz relative to external reference
Frequency stability (internal reference) better than ±0.5 ppm over temperature
Aging better than ±1.5 ppm first year; ±5 ppm over 10 years
Control, Power & Mechanical
Control SPI (TTL level); RS232 diagnostic interface
Alarms TTL 1: High = locked, Low = unlocked; TTL 2: High = power normal, Low = power low
Power supply +11 to +15 VDC (+12V nominal); 1 A max @ +12V
RF connectors 2.92 mm female (18–40 GHz ports); SMA female (0.1–18 GHz ports)
Control connector 25-pin D-sub (mating connector available)
Size 130 × 100 × 27 mm (excluding connectors)
Mounting / finish 4 × M3 × 6; nickel plated
Operating temperature -40°C to +85°C (base-plate)
Storage temperature -55°C to +95°C
Environmental design targets MIL-STD-810G: random vibration, mechanical shock, acceleration, altitude (30,000 ft), humidity, salt fog, fluid contamination, rain, fungus

Request a Quote / Datasheet

Request a Quote or Datasheet

Tell us what you need and we will reply by email. You can also call +972-3-9067155 or write to sales@rmsl-tech.com.

    Call Request a quote