
PC/SPI-programmable microwave synthesizer, 0.1–40 GHz, dual-band architecture (0.1–18 GHz and 18–40 GHz) with 8 outputs and built-in high-stability reference.
| Frequency & Outputs | |||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Frequency range | 0.1 – 18 GHz on RFOUT2, RFOUT3, RFOUT4, RFOUT5, RFMON3; 18 – 40 GHz on RFOUT1, RFMON1, RFMON2 (only one band active at a time) | ||||||||||||||||||||||||||||||
| Number of outputs | 8 | ||||||||||||||||||||||||||||||
| Frequency step | 0.5 MHz | ||||||||||||||||||||||||||||||
| Output impedance | 50 Ω nominal | ||||||||||||||||||||||||||||||
| Frequency switching time | 150 µs typ; 200 µs max after LE signal | ||||||||||||||||||||||||||||||
| Output Power (programmable within 60 dB attenuator range) | |||||||||||||||||||||||||||||||
| RFOUT1 (18–40 GHz) | -15 dBm | ||||||||||||||||||||||||||||||
| RFMON1, RFMON2 (18–40 GHz) | -30 dBm | ||||||||||||||||||||||||||||||
| RFOUT2–5 (0.1–18 GHz) | 0 dBm | ||||||||||||||||||||||||||||||
| RFMON3 (0.1–18 GHz) | -20 dBm | ||||||||||||||||||||||||||||||
| RF power variation | ±1.5 dB typ; ±3 dB max over temperature and frequency | ||||||||||||||||||||||||||||||
| Isolation between high / low band outputs | > 60 dB | ||||||||||||||||||||||||||||||
| RF mute | Yes, > 60 dB isolation; switching time < 100 ns | ||||||||||||||||||||||||||||||
| Output Level Control | |||||||||||||||||||||||||||||||
| Range / step | 0 – 60 dB / 1 dB | ||||||||||||||||||||||||||||||
| Accuracy 0.1–10 GHz | ±0.75 dB typ @ +25°C; ±1 dB over temperature | ||||||||||||||||||||||||||||||
| Accuracy 10–18 GHz | ±1 dB typ @ +25°C; ±1.5 dB over temperature | ||||||||||||||||||||||||||||||
| Accuracy 18–26 GHz | ±1.5 dB typ @ +25°C; ±2 dB over temperature | ||||||||||||||||||||||||||||||
| Accuracy 26–40 GHz | ±2 dB typ @ +25°C; ±3 dB over temperature | ||||||||||||||||||||||||||||||
| Spectral Purity | |||||||||||||||||||||||||||||||
| Spurious | -60 dBc typ; -50 dBc max (carrier ±10 MHz) | ||||||||||||||||||||||||||||||
| Subharmonics | -50 dBc typ; -40 dBc max | ||||||||||||||||||||||||||||||
| Harmonics | -30 dBc typ; max -15 dBc (100–1000 MHz), -20 dBc above 1000 MHz | ||||||||||||||||||||||||||||||
| SSB Phase Noise (dBc/Hz, typ / max) | |||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
| Reference | |||||||||||||||||||||||||||||||
| Reference input | 10 MHz or 100 MHz, -6 to +6 dBm (automatic detection) | ||||||||||||||||||||||||||||||
| Reference output | 0 dBm @ 50 Ω load | ||||||||||||||||||||||||||||||
| Frequency accuracy (external reference) | error < 1 Hz relative to external reference | ||||||||||||||||||||||||||||||
| Frequency stability (internal reference) | better than ±0.5 ppm over temperature | ||||||||||||||||||||||||||||||
| Aging | better than ±1.5 ppm first year; ±5 ppm over 10 years | ||||||||||||||||||||||||||||||
| Control, Power & Mechanical | |||||||||||||||||||||||||||||||
| Control | SPI (TTL level); RS232 diagnostic interface | ||||||||||||||||||||||||||||||
| Alarms | TTL 1: High = locked, Low = unlocked; TTL 2: High = power normal, Low = power low | ||||||||||||||||||||||||||||||
| Power supply | +11 to +15 VDC (+12V nominal); 1 A max @ +12V | ||||||||||||||||||||||||||||||
| RF connectors | 2.92 mm female (18–40 GHz ports); SMA female (0.1–18 GHz ports) | ||||||||||||||||||||||||||||||
| Control connector | 25-pin D-sub (mating connector available) | ||||||||||||||||||||||||||||||
| Size | 130 × 100 × 27 mm (excluding connectors) | ||||||||||||||||||||||||||||||
| Mounting / finish | 4 × M3 × 6; nickel plated | ||||||||||||||||||||||||||||||
| Operating temperature | -40°C to +85°C (base-plate) | ||||||||||||||||||||||||||||||
| Storage temperature | -55°C to +95°C | ||||||||||||||||||||||||||||||
| Environmental design targets | MIL-STD-810G: random vibration, mechanical shock, acceleration, altitude (30,000 ft), humidity, salt fog, fluid contamination, rain, fungus | ||||||||||||||||||||||||||||||
Request a Quote or Datasheet
Tell us what you need and we will reply by email. You can also call +972-3-9067155 or write to sales@rmsl-tech.com.

