← Back to High Power Amplifiers
Solid-state power amplifier, 2–6 GHz, 200 W CW saturated output, 54 dB small-signal gain. Heatsink with fans, 28 VDC.
| Electrical Specifications (@ +25°C, 28 VDC) | |
|---|---|
| Operating frequency | 2 – 6 GHz |
| Psat CW | 200 W min |
| Input for rated output power | -10 to 0 dBm |
| Small signal gain | 54 dB min |
| Gain flatness | ±4.0 dB max |
| Maximum input power without damage | +2 dBm |
| Input VSWR | ≤ 2:1 |
| 2nd harmonics @ Pout = 100 W | -15 dBc typ; -10 dBc max |
| Spurious | ≤ -60 dBc |
| Operating voltage | 27.8 / 28 / 28.2 VDC (min / typ / max) |
| Current consumption | 34 A typ; 38 A max |
| Current consumption for fans | 17 A typ |
| PA enable / disable time | 5 µs typ; 10 µs max |
| Mechanical | |
| Dimensions | 345 × 277 × 146 mm |
| Weight | 13 kg with heatsink |
| RF input connector | TNC female, 50 Ω |
| RF output connector | N female, 50 Ω |
| DC interface connector | Circular connector |
| Cooling | Heatsink with fans |
| Environmental | |
| Operating case temperature | -40°C to +85°C |
| Storage temperature | -40°C to +85°C |
| Relative humidity (non-condensing) | 95% max |
| Altitude | Up to 30,000 ft (MIL-STD-810F, Method 500.4) |
| Vibration / shock | MIL-STD-810F, Method 514.5 / 516.5, Procedure I |
| Note | Design to meet: altitude and vibration/shock are designed with considerations, but without tests. |
| Control, Power & Protection | |
| Control connector | RS422: PA enable/disable (RX+/RX-), UART (RX+/RX-, TX+/TX-), shield ground |
| Power connector | +28V (pins A, B); ground (pins C, D) |
| Protection | Over temperature, over voltage, over current |
Request a Quote or Datasheet
Tell us what you need and we will reply by email. You can also call +972-3-9067155 or write to sales@rmsl-tech.com.